-
×
Raspberry Pi HQ Camera
1 × ₦104,900
Subtotal: ₦104,900
RASPBERRY PI STORE
Showing 1–30 of 33 results
- RASPBERRY PI STORE
IC RP2040 (RP2B2) T&R 500
Specification
- Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz
- 264kB on-chip SRAM
- 2 ? UART, 2 ? SPI controllers, 2 ? I2C controllers, 16 ? PWM channels
- 1 ? USB 1.1 controller and PHY, with host and device support
- 8 ? Programmable I/O (PIO) state machines for custom peripheral support
- Supported input power 1.8?5.5V DC
- Operating temperature -40?C to +85?C
- Drag-and-drop programming using mass storage over USB
- Low-power sleep and dormant modes
- Accurate on-chip clock
- Temperature sensor
- Accelerated integer and floating-point libraries on-chip
SKU: SC0914(7) - RASPBERRY PI STORE
OFFICIAL RASPBERRY PI 4 DESKTOP KIT ONLY
SPECIFICATIONS
The Raspberry Pi 4 Desktop kit is supplied with:
- Raspberry Pi Keyboard & Mouse
- Micro HDMI to Standard HDMI (A/M) 1m Cables
- Raspberry Pi 15.3W USB-C Power Supply
- Raspberry Pi 4 Case
- Official Raspberry Pi Beginner’s Guide (English language)
- 16GB NOOBS with Raspbian microSD card
SKU: SC0400UK - RASPBERRY PI STORE
OFFICIAL RASPBERRY PI 4 DESKTOP KIT WITH BOARD
SPECIFICATIONS
The Raspberry Pi 4 Desktop kit is supplied with:
- Raspberry Pi 4 Model B, 2GB,4GB,8GB RAM
- Raspberry Pi Keyboard & Mouse
- Micro HDMI to Standard HDMI (A/M) 1m Cables
- Raspberry Pi 15.3W USB-C Power Supply
- Raspberry Pi 4 Case
- Official Raspberry Pi Beginner’s Guide (English language)
- 16GB NOOBS with Raspbian microSD card
SKU: SC0400 - Development Tools, Software & Embedded Computers, Industrial Heaters, Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi 5
Development Tools, Software & Embedded Computers, Industrial Heaters, Raspberry Pi, RASPBERRY PI STORERaspberry Pi 5
Specification
Processor Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU,
with cryptography extensions, 512KB per-core L2 caches, and a
2MB shared L3 cacheFeatures: • VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
• Dual 4Kp60 HDMI® display output with HDR support
• 4Kp60 HEVC decoder
• LPDDR4X-4267 SDRAM
(4GB and 8GB SKUs available at launch)
• Dual-band 802.11ac Wi-Fi®
• Bluetooth 5.0 / Bluetooth Low Energy (BLE)
• microSD card slot, with support for high-speed SDR104 mode
• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
• 2 × USB 2.0 ports
• Gigabit Ethernet, with PoE+ support
(requires separate PoE+ HAT)
• 2 × 4-lane MIPI camera/display transceivers
• PCIe 2.0 x1 interface for fast peripherals
(requires separate M.2 HAT or other adapter)
• 5V/5A DC power via USB-C, with Power Delivery support
• Raspberry Pi standard 40-pin header
• Real-time clock (RTC), powered from external battery
• Power buttonSKU: n/a - Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi 5 Desktop Kit Alone
Specification:
Processor Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with Cryptographic Extension, 512KB per-core L2 caches, and a 2MB shared L3 cache
Features:
• VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
• Dual 4Kp60 HDMI® display output with HDR support
• 4Kp60 HEVC decoder
• LPDDR4X-4267 SDRAM (options for 2GB, 4GB, 8GB and 16GB)
• Dual-band 802.11ac Wi-Fi®
• Bluetooth 5.0 / Bluetooth Low Energy (BLE)
• microSD card slot, with support for high-speed SDR104 mode
• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
• 2 × USB 2.0 ports
• Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT)
• 2 × 4-lane MIPI camera/display transceivers
• PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter)
• 5V/5A DC power via USB-C, with Power Delivery support
• Raspberry Pi standard 40-pin header
• Real-time clock (RTC), powered from external battery
• Power buttonSKU: SC1170UK - Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi 5 Desktop Kit with Board
Specification:
Processor Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with Cryptographic Extension, 512KB per-core L2 caches, and a 2MB shared L3 cache
Features:
• VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
• Dual 4Kp60 HDMI® display output with HDR support
• 4Kp60 HEVC decoder
• LPDDR4X-4267 SDRAM (options for 2GB, 4GB, 8GB and 16GB)
• Dual-band 802.11ac Wi-Fi®
• Bluetooth 5.0 / Bluetooth Low Energy (BLE)
• microSD card slot, with support for high-speed SDR104 mode
• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
• 2 × USB 2.0 ports
• Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT)
• 2 × 4-lane MIPI camera/display transceivers
• PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter)
• 5V/5A DC power via USB-C, with Power Delivery support
• Raspberry Pi standard 40-pin header
• Real-time clock (RTC), powered from external battery
• Power buttonSKU: SC1170UK-1 - Accessories, Enclosures, Boxes & Cases, Enclosures, Racks & Cabinets, RASPBERRY PI STORE
Raspberry Pi 5 Official Case
Accessories, Enclosures, Boxes & Cases, Enclosures, Racks & Cabinets, RASPBERRY PI STORERaspberry Pi 5 Official Case
Specification
Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5.
Fan speed control: Pulse width modulation control with tachometer
Maximum airflow: 2.79 CFM Maximum fan speed: 8000 RPM +/- 15%
Case material: ABS (base, frame, lid) and PC (fan assemblySKU: SC1159 - Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi AI Camera
The Raspberry Pi AI Camera is a compact camera module from Raspberry Pi, based on the Sony IMX500 Intelligent Vision Sensor. IMX500 combines a 12-megapixel CMOS image sensor with on-board inferencing acceleration for a variety of common neural network models, enabling users to develop sophisticated vision-based AI applications without the need for a separate accelerator.
The AI Camera transparently augments captured still images or video with tensor metadata, leaving the processor in the host Raspberry Pi free to perform other operations. Support for tensor metadata in the libcamera and Picamera2 libraries, and in the rpicam-apps application suite, make it easy for beginners to use, while offering advanced users unparallelled power and flexibility.
The Raspberry Pi AI Camera is compatible with all Raspberry Pi computers. The PCB outline and mounting hole locations are identical to those of Raspberry Pi Camera Module 3, while the overall depth is greater to accommodate the larger IMX500 sensor and optical subassembly.
SKU: n/a - Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi AI Kit
The Raspberry Pi AI Kit bundles the Raspberry Pi M.2 HAT+ with a Hailo AI acceleration module for use with Raspberry Pi 5. It provides an accessible, cost-effective, and power efficient way to integrate high-performance AI. Explore applications including process control, security, home automation, and robotics.
Contains:
- a Hailo AI module containing a Neural Processing Unit (NPU)
- a Raspberry Pi M.2 HAT+, to connect the AI module to your Raspberry Pi 5
- a thermal pad pre-fitted between the module and the M.2 HAT+
- a mounting hardware kit
- a 16mm stacking GPIO header
The AI module is a 13 tera-operations per second (TOPS) neural network inference accelerator built around the Hailo-8L chip. The module uses the M.2 2242 form factor, and comes pre-installed in the M.2 HAT+, to which it connects through an M key edge connector. The M.2 HAT+ communicates between the AI module’s M.2 interface and the Raspberry Pi 5’s PCIe 2.0 interface.
When the host Raspberry Pi 5 is running an up-to-date Raspberry Pi OS image, it automatically detects the Hailo module and makes the NPU available for AI computing tasks. The built-in rpicam-apps camera applications in Raspberry Pi OS natively support the AI module, automatically using the NPU to run compatible post-processing tasks.
SKU: SC1438 - RASPBERRY PI STORE, Uncategorized
Raspberry Pi Debug Probe
Specification
Form factor: 22mm × 32mm
Features: • USB to two-wire serial debug bridge (Arm Serial Wire Debug
supported by default)
• USB to UART bridge
• Compatible with the CMSIS-DAP standard
• Works with OpenOCD and other tools supporting CMSIS-DAP
• Follows the Raspberry Pi 3-pin Debug Connector Specification
Included: • High-quality plastic case
• USB cable
• Three debug cables:
• 3-pin JST connector to 3-pin JST connector cable
• 3-pin JST connector to 0.1-inch header (female)
• 3-pin JST connector to 0.1-inch header (male)
Nominal I/O voltage: 3.3V
Operating temperature: -20°C to +70°CSKU: SC0889 - Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi HQ Camera
Specification
Sensor: Sony IMX477R stacked, back-illuminated sensor
Resolution: 12.3 megapixels
Sensor size: 7.9mm sensor diagonal
Pixel size: 1.55μm × 1.55μm
Output: RAW12/10/8, COMP8
Back focus length of lens: 2.6mm–11.8mm (M12 Mount variant)
12.5mm–22.4mm (CS Mount variant)Lens sensor format: 1/2.3” (7.9mm) or larger
IR cut filter: Integrated2
Ribbon cable length: 200mm
Tripod mount: 1/4”-20
Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device
Electromagnetic Compatibility Directive (EMC)
2014/30/EU
Restriction of Hazardous Substances (RoHS) Directive
2011/65/EUSKU: n/a - RASPBERRY PI STORE
Raspberry Pi Pico
The?Raspberry Pi Pico?is an entirely new type of microcontroller from Raspberry Pi. Small, cheap and flexible – it?s great for learning to code with MicroPython!
This is?the standard?Raspberry Pi Pico?- which comes without any?headers??fitted. You can also?purchase our pre-soldered Raspberry Pi Pico here?.
Whether you?re looking to learn about the MicroPython programming language, take your first steps in physical computing or want to build a hardware project, the Raspberry Pi Pico ? and its amazing community ? will support you every step of the way.?We also have a great range of accessories for the Pico too!
SKU: SWB04002 - Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi Pico 2
Specification
Form factor: 21 mm × 51 mm
CPU: Dual Arm Cortex-M33 or dual RISC-V Hazard3 processors @ 150MHz
Memory: 520 KB on-chip SRAM; 4 MB on-board QSPI flash
Interfacing: 26 multi-purpose GPIO pins, including 4 that can be used for ADC
Peripherals: • 2 × UART
• 2 × SPI controllers
• 2 × I2C controllers
• 24 × PWM channels
• 1 × USB 1.1 controller and PHY, with host and device support
• 12 × PIO state machines
Input power: 1.8–5.5V DC
Operating temperature: -20°C to +85°CSKU: SC1631 - RASPBERRY PI STORE
Raspberry Pi Pico H
The?Raspberry Pi Pico?is an entirely new type of microcontroller from Raspberry Pi. Small, cheap and flexible – it?s great for learning to code with MicroPython!
This is?the standard?Raspberry Pi Pico?- which comes without any?headers??fitted. You can also?purchase our pre-soldered Raspberry Pi Pico here?.
Whether you?re looking to learn about the MicroPython programming language, take your first steps in physical computing or want to build a hardware project, the Raspberry Pi Pico ? and its amazing community ? will support you every step of the way.?We also have a great range of accessories for the Pico too!
SKU: SWB04002-1 - RASPBERRY PI STORE
Raspberry Pi Pico WH.
Overview
The Raspberry Pico W and Pico WH (with Headers) is a microcontroller based developement board. At this heart is a RP2040 microcontroller chip designed by Raspberry Pi in UK. It features a Dual Core ARM Cortex-M0+ processor running upto 133 MHz with 264 KB of on-chip SRAM. The Pico also has a 2 MB of onboard Flash memory, providing enough space for code and data storage.
The “W” in the Pico W standards for wireless connectivity. Pico W offers offers 2.4GHz 802.11 b/g/n wireless LAN support and Bluetooth 5.2, with an on-board antenna, and modular compliance certification. It can be operated in both station and access point modes.
Pico has extensive I/O capabilities with 26 GPIO Pins, including 3 Analog Inputs and lots of interfacing options including 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels. Moreover, 26 of the GPIO pins are multi-function, which means we can configure those pins to a different behavior like UART/I2C/SPI/GPIO.
It includes a USB 1.1 with device and host support, allowing easy connection to PCs or other USB devices, this enables drag-and-drop programming feature that simplifies the process of loading and updating code on the device using mass storage over USB.
Features
- Castellated module allows soldering direct to carrier boards (Raspberry Pi Pico and Pico W only)
- Drag-and-drop programming using mass storage over USB
- Low-power sleep and dormant modes
- Accurate on-chip clock
- Temperature sensor
- Accelerated integer and floating-point libraries on-chip
SKU: SWB04002-1-1 - Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi SSD Kit
Specification
Features: 256GB NVMe – 40k IOPS (4kB random reads)
70k IOPS (4kB random writes)
512GB NVMe – 50k IOPS (4kB random reads)
90k IOPS (4kB random writes)
Conforms to the Raspberry Pi HAT+ specification
Contains a Raspberry Pi SSD (256GB NVMe or 512GB NVMe)SKU: n/a - Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi Zero 2 W with Headers
Raspberry Pi Zero 2 W is the latest product in our most affordable range of single-board computers. The successor to the breakthrough Raspberry Pi Zero W, Raspberry Pi Zero 2 W is a form factor–compatible drop-in replacement for the original board.
The board incorporates a quad-core 64-bit Arm Cortex-A53 CPU, clocked at 1GHz. At its heart is a Raspberry Pi RP3A0 system-in-package (SiP), integrating a Broadcom BCM2710A1 die with 512MB of LPDDR2 SDRAM. The upgraded processor provides Raspberry Pi Zero 2 W with 40% more single-threaded performance, and five times more multi-threaded performance, than the original single-core Raspberry Pi Zero.
Raspberry Pi Zero 2 W offers 2.4GHz 802.11 b/g/n wireless LAN and Bluetooth 4.2, along with support for Bluetooth Low Energy (BLE), and modular compliance certification.
The board has a microSD card slot, a CSI-2 camera connector, a USB On-The-Go (OTG) port, and an unpopulated footprint for a HAT-compatible 40-pin GPIO header. It is powered via a micro USB socket. Video output is via a mini HDMI port; composite video output can easily be made available via test points if needed.
Sharing the same form factor as the original Raspberry Pi Zero, Raspberry Pi Zero 2 W fits inside most existing Raspberry Pi Zero cases.SKU: SC0721 - Embedded Development Kits & Accessories, Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi Zero WH with Pre-soldered GPIO Headers
Embedded Development Kits & Accessories, Raspberry Pi, RASPBERRY PI STORE, Single Board ComputersRaspberry Pi Zero WH with Pre-soldered GPIO Headers
1 GHz, single-core CPU
512MB RAM
Mini HDMI and USB On-The-Go ports
Micro USB power
HAT-compatible 40-pin header
Composite video and reset headers
CSI camera connector
802.11 b/g/n wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)SKU: SC0065 - RASPBERRY PI STORE
Argon IR Remote for Argon ONE V2 and M.2 Cases
The Argon40 IR remote is the ultimate media centre accessory for owners of the?Argon ONE V2??and?Argon ONE M.2??cases for the Raspberry Pi!
This stylish remote feels great in the hand works out of the box with the Argon ONE V2 and Argon ONE M.2 to control power on and off, and with a simple software installation, you can take advantage of the full remote button set with Raspberry Pi OS or?LibreELEC?(Kodi)!
SKU: n/a - RASPBERRY PI STORE
Argon IR Remote for Argon ONE V2 and M.2 Cases
The Argon40 IR remote is the ultimate media centre accessory for owners of the?Argon ONE V2??and?Argon ONE M.2??cases for the Raspberry Pi!
This stylish remote feels great in the hand works out of the box with the Argon ONE V2 and Argon ONE M.2 to control power on and off, and with a simple software installation, you can take advantage of the full remote button set with Raspberry Pi OS or?LibreELEC?(Kodi)!
SKU: n/a - RASPBERRY PI STORE
Argon ONE V2 Raspberry Pi 4 Case
New V2 version with full-size HDMI ports and built-in infrared receiver!
The Argon ONE Case is one of our best-selling?Raspberry Pi 4??cases – and it just got even better with the new V2 version, which now features?full-size HDMI??ports and a built-in infrared receiver.
SKU: n/a - RASPBERRY PI STORE
Argon ONE V2 Raspberry Pi 4 Case
New V2 version with full-size HDMI ports and built-in infrared receiver!
The Argon ONE Case is one of our best-selling?Raspberry Pi 4??cases – and it just got even better with the new V2 version, which now features?full-size HDMI??ports and a built-in infrared receiver.
SKU: n/a - RASPBERRY PI STORE
Essential Raspberry Pi Pico Kit
Looking to get the most out of your?Raspberry Pi Pico?? Look no further!
Our excellent value Raspberry Pi Pico Essentials Kit provides a tin full of all the essential accessories you’ll need for your Pico projects.
Note:?Pico not included?- this is an accessories kit only.
SKU: n/a - RASPBERRY PI STORE
Essential Raspberry Pi Pico Kit
Looking to get the most out of your?Raspberry Pi Pico?? Look no further!
Our excellent value Raspberry Pi Pico Essentials Kit provides a tin full of all the essential accessories you’ll need for your Pico projects.
Note:?Pico not included?- this is an accessories kit only.
SKU: n/a - RASPBERRY PI STORE
Raspberry Pi 4 Model B Retro Gaming Kit
Our great value Raspberry Pi 4 Retro Gaming Kit is the best way to create your very own retro gaming console and includes everything you need (minus games – see below).
With everything in one box, you can be up and running in a matter of minutes. Just connect a screen, plug in the controllers, load your own game files (ROMs) and start shooting down 8-bit aliens with your friends!
SKU: n/a - RASPBERRY PI STORE
Raspberry Pi 4 Model B Retro Gaming Kit
Our great value Raspberry Pi 4 Retro Gaming Kit is the best way to create your very own retro gaming console and includes everything you need (minus games – see below).
With everything in one box, you can be up and running in a matter of minutes. Just connect a screen, plug in the controllers, load your own game files (ROMs) and start shooting down 8-bit aliens with your friends!
SKU: n/a - RASPBERRY PI STORE
Raspberry Pi PoE+ HAT
The Raspberry Pi PoE+ HAT is a new version of the original Raspberry Pi PoE HAT, now with 5V 4A output for the most demanding Raspberry Pi applications! It?is designed to replace the original PoE HAT in all new and existing designs?and meets all requirements of the IEEE 802.3af (802.3at Type 1) specifications.
SKU: n/a - RASPBERRY PI STORE
Raspberry Pi PoE+ HAT
The Raspberry Pi PoE+ HAT is a new version of the original Raspberry Pi PoE HAT, now with 5V 4A output for the most demanding Raspberry Pi applications! It?is designed to replace the original PoE HAT in all new and existing designs?and meets all requirements of the IEEE 802.3af (802.3at Type 1) specifications.
SKU: n/a
