Embedded Development Kits & Accessories
Showing all 7 results
- Embedded Development Kits & Accessories, Fans & Blowers, Heat Sinks, Raspberry Pi
Case Fan & heatsink for Raspberry Pi 4 Case
Embedded Development Kits & Accessories, Fans & Blowers, Heat Sinks, Raspberry PiCase Fan & heatsink for Raspberry Pi 4 Case
0 out of 5(0)Fitting instructions
1 Remove any SD card, then put your Raspberry Pi into the lower half (base)
of the case. Take care to align the mounting holes in the corners with the
bumps in the case.
2 Insert the fan into the upper half (lid) of the case, with the green label facing
away from the lid. Push gently but firmly so that the two tabs on the fan
housing click neatly into place inside the tabs on the lid. The slightly curved
edge of the housing should be flush with the underside of the lid.
3 If you are also fitting the heatsink, remove the backing paper from the
self-adhesive pad on the base of the heatsink, position it centrally over the
processor, and gently press it into position.
4 Connect the three leads from the fan to the Raspberry Pi 4?s GPIO pins, as
shown in the table and diagram below. Take care to connect each lead to the
correct pin.
Lead Colour GPIO pin
5v RED 4
Ground BLACK 6
GPIO 14 BLUE 8
5 Fit the lid of the case onto the base.WARNINGS
? This product should only be used in conjunction with Raspberry Pi 4 Model B and the official Raspberry
Pi 4 Case.
? This product should be operated in a well-ventilated environment and the case should not be covered.
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product, please observe the following:
? Do not expose to water or moisture, or place on a conductive surface whilst in operation.
? Do not expose to heat from any external source; the Raspberry Pi Case Fan is designed for reliable
operation at normal ambient temperatures.
? Take care whilst handling to avoid mechanical or electrical damage to the fan and connectors.
? Avoid handling the fan whilst it is powered.SKU: SC0448₦12,900 - Embedded Development Kits & Accessories
PI400 GPIO PROTECTOR
0 out of 5(0)The IO board comes with a 40pin ribbon cable, which is Grey and rainbow colour optional, 40pin black male connector with anti-reverse insertion at one end is to connect the 40pin female connector at the back of the Pi 400, the user can install the daughter board on the IO board.
All of the materials used on this product are RoHS compliant.SKU: n/a₦9,600 – ₦14,000 - Embedded Development Kits & Accessories, Raspberry Pi
Raspberry Pi Keyboard UK (Red/Whit
0 out of 5(0)Specification:
Keyboard & hub
? 79-key keyboard (78-key keyboard for US model, 83-key keyboard for
Japanese model)
? Three USB 2.0 type A ports for powering other peripherals
? Automatic keyboard language detection
? USB type A to micro USB type B cable included for connection
to compatible computer
? Weight: 269g (376g including packaging)
? Dimensions: 284.80mm 121.61mm ? 20.34mm
? (330mm ? 130mm ? 28mm including packaging)SKU: SWB04004₦33,500 - Embedded Development Kits & Accessories, Raspberry Pi
Raspberry Pi Mouse (Red/White)
0 out of 5(0)Specification
? Three-button optical mouse
? Scroll wheel
? USB type A connector
? Weight: 105g (110g including packaging)
? Dimensions: 64.12mm ? 109.93mm ? 31.48mm
? (115mm ?75mm ? 33mm including packaging)SKU: SWB04005₦16,800 - Embedded Development Kits & Accessories, Raspberry Pi
KSA-15E-051300HK official Power Supply, UK UCON 00978
Embedded Development Kits & Accessories, Raspberry PiKSA-15E-051300HK official Power Supply, UK UCON 00978
0 out of 5(0)The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019. Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.
SKU: SWB01001₦16,300
Showing all 7 results