No products in the cart.
Raspberry Pi
Showing all 19 results
- Embedded Development Kits & Accessories, Fans & Blowers, Heat Sinks, Raspberry Pi
Case Fan & heatsink for Raspberry Pi 4 Case
Embedded Development Kits & Accessories, Fans & Blowers, Heat Sinks, Raspberry PiCase Fan & heatsink for Raspberry Pi 4 Case
Fitting instructions
1 Remove any SD card, then put your Raspberry Pi into the lower half (base)
of the case. Take care to align the mounting holes in the corners with the
bumps in the case.
2 Insert the fan into the upper half (lid) of the case, with the green label facing
away from the lid. Push gently but firmly so that the two tabs on the fan
housing click neatly into place inside the tabs on the lid. The slightly curved
edge of the housing should be flush with the underside of the lid.
3 If you are also fitting the heatsink, remove the backing paper from the
self-adhesive pad on the base of the heatsink, position it centrally over the
processor, and gently press it into position.
4 Connect the three leads from the fan to the Raspberry Pi 4?s GPIO pins, as
shown in the table and diagram below. Take care to connect each lead to the
correct pin.
Lead Colour GPIO pin
5v RED 4
Ground BLACK 6
GPIO 14 BLUE 8
5 Fit the lid of the case onto the base.WARNINGS
? This product should only be used in conjunction with Raspberry Pi 4 Model B and the official Raspberry
Pi 4 Case.
? This product should be operated in a well-ventilated environment and the case should not be covered.
SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product, please observe the following:
? Do not expose to water or moisture, or place on a conductive surface whilst in operation.
? Do not expose to heat from any external source; the Raspberry Pi Case Fan is designed for reliable
operation at normal ambient temperatures.
? Take care whilst handling to avoid mechanical or electrical damage to the fan and connectors.
? Avoid handling the fan whilst it is powered.SKU: SC0448 - Audio & Video Connectors & Adapters, Raspberry Pi
Micro-HDMI (M) to HDMI-A (M) Cable 1M White
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
SKU: SWB04007 - Displays, Raspberry Pi
Raspberry Pi 7″ touchscreen display
Specification
Raspberry Pi OS provides touchscreen drivers with support for ten-finger touch and an on-screen keyboard, giving you full functionality without the need to connect a keyboard or mouse.
The 800 x 480 display connects to Raspberry Pi via an adapter board that handles power and signal conversion. Only two connections to your Raspberry Pi are required: power from the GPIO port, and a ribbon cable that connects to the DSI port on all Raspberry Pi computers except for the Raspberry Pi Zero line.
Display size (diagonal):?7 inches
Display format:?800 (RGB)???480 pixels
Active area:?154.08mm???85.92mm
Touch panel: True multi-touch capacitive touch panel with up to 10 points of absolute
Surface treatment: Anti-glare
Colour configuration: RGB-stripe
Backlight type: LED B/L
SKU: SWB04006 - Development Tools, Software & Embedded Computers, Industrial Heaters, Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi 5
Development Tools, Software & Embedded Computers, Industrial Heaters, Raspberry Pi, RASPBERRY PI STORERaspberry Pi 5
Specification
Processor Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU,
with cryptography extensions, 512KB per-core L2 caches, and a
2MB shared L3 cacheFeatures: • VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
• Dual 4Kp60 HDMI® display output with HDR support
• 4Kp60 HEVC decoder
• LPDDR4X-4267 SDRAM
(4GB and 8GB SKUs available at launch)
• Dual-band 802.11ac Wi-Fi®
• Bluetooth 5.0 / Bluetooth Low Energy (BLE)
• microSD card slot, with support for high-speed SDR104 mode
• 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
• 2 × USB 2.0 ports
• Gigabit Ethernet, with PoE+ support
(requires separate PoE+ HAT)
• 2 × 4-lane MIPI camera/display transceivers
• PCIe 2.0 x1 interface for fast peripherals
(requires separate M.2 HAT or other adapter)
• 5V/5A DC power via USB-C, with Power Delivery support
• Raspberry Pi standard 40-pin header
• Real-time clock (RTC), powered from external battery
• Power buttonSKU: n/a - Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi AI Kit
The Raspberry Pi AI Kit bundles the Raspberry Pi M.2 HAT+ with a Hailo AI acceleration module for use with Raspberry Pi 5. It provides an accessible, cost-effective, and power efficient way to integrate high-performance AI. Explore applications including process control, security, home automation, and robotics.
Contains:
- a Hailo AI module containing a Neural Processing Unit (NPU)
- a Raspberry Pi M.2 HAT+, to connect the AI module to your Raspberry Pi 5
- a thermal pad pre-fitted between the module and the M.2 HAT+
- a mounting hardware kit
- a 16mm stacking GPIO header
The AI module is a 13 tera-operations per second (TOPS) neural network inference accelerator built around the Hailo-8L chip. The module uses the M.2 2242 form factor, and comes pre-installed in the M.2 HAT+, to which it connects through an M key edge connector. The M.2 HAT+ communicates between the AI module’s M.2 interface and the Raspberry Pi 5’s PCIe 2.0 interface.
When the host Raspberry Pi 5 is running an up-to-date Raspberry Pi OS image, it automatically detects the Hailo module and makes the NPU available for AI computing tasks. The built-in rpicam-apps camera applications in Raspberry Pi OS natively support the AI module, automatically using the NPU to run compatible post-processing tasks.
SKU: SC1438 - Embedded Computers, Education & Maker Boards, Other Educational & Maker Boards, Raspberry Pi
Raspberry Pi Camera V2 NOIR
Embedded Computers, Education & Maker Boards, Other Educational & Maker Boards, Raspberry PiRaspberry Pi Camera V2 NOIR
The camera works with?all models?of Raspberry Pi 1, 2, 3 and 4. It can be accessed through the MMAL and V4L APIs, and there are numerous third-party libraries built for it, including the?Picamera?Python library. See the?Getting Started with Picamera?resource to learn how to use it.
SKU: SWB04001 - Embedded Development Kits & Accessories, Raspberry Pi
Raspberry Pi Keyboard UK (Red/Whit
Specification:
Keyboard & hub
? 79-key keyboard (78-key keyboard for US model, 83-key keyboard for
Japanese model)
? Three USB 2.0 type A ports for powering other peripherals
? Automatic keyboard language detection
? USB type A to micro USB type B cable included for connection
to compatible computer
? Weight: 269g (376g including packaging)
? Dimensions: 284.80mm 121.61mm ? 20.34mm
? (330mm ? 130mm ? 28mm including packaging)SKU: SWB04004 - Embedded Development Kits & Accessories, Raspberry Pi
Raspberry Pi Mouse (Red/White)
Specification
? Three-button optical mouse
? Scroll wheel
? USB type A connector
? Weight: 105g (110g including packaging)
? Dimensions: 64.12mm ? 109.93mm ? 31.48mm
? (115mm ?75mm ? 33mm including packaging)SKU: SWB04005 - Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi Pico 2
Specification
Form factor: 21 mm × 51 mm
CPU: Dual Arm Cortex-M33 or dual RISC-V Hazard3 processors @ 150MHz
Memory: 520 KB on-chip SRAM; 4 MB on-board QSPI flash
Interfacing: 26 multi-purpose GPIO pins, including 4 that can be used for ADC
Peripherals: • 2 × UART
• 2 × SPI controllers
• 2 × I2C controllers
• 24 × PWM channels
• 1 × USB 1.1 controller and PHY, with host and device support
• 12 × PIO state machines
Input power: 1.8–5.5V DC
Operating temperature: -20°C to +85°CSKU: SC1631 - Electrical Accessories, Raspberry Pi
Raspberry Pi Sense HAT Rev 2
The Sense HAT has an 8×8 RGB LED matrix and a five-button joystick, and includes the following sensors:
- Gyroscope
- Accelerometer
- Magnetometer
- Temperature
- Barometric pressure
- Humidity
- Colour and brightness
Schematics and mechanical drawings for the Sense HAT and the Sense HAT V2 are available for download.
LED matrix
The LED matrix is an RGB565 framebuffer with the id
RPi-Sense FB. The appropriate device node can be written to as a standard file or mmap-ed. The included snake example shows how to access the framebuffer.Joystick
The joystick comes up as an input event device named
Raspberry Pi Sense HAT Joystick, mapped to the arrow keys and Enter.
It should be supported by any library which is capable of handling inputs, or directly through the evdev interface. Suitable libraries include SDL, pygame and python-evdev.
The includedsnakeexample shows how to access the joystick directly.SKU: SC0329 - Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi Zero 2 W with Headers
Raspberry Pi Zero 2 W is the latest product in our most affordable range of single-board computers. The successor to the breakthrough Raspberry Pi Zero W, Raspberry Pi Zero 2 W is a form factor–compatible drop-in replacement for the original board.
The board incorporates a quad-core 64-bit Arm Cortex-A53 CPU, clocked at 1GHz. At its heart is a Raspberry Pi RP3A0 system-in-package (SiP), integrating a Broadcom BCM2710A1 die with 512MB of LPDDR2 SDRAM. The upgraded processor provides Raspberry Pi Zero 2 W with 40% more single-threaded performance, and five times more multi-threaded performance, than the original single-core Raspberry Pi Zero.
Raspberry Pi Zero 2 W offers 2.4GHz 802.11 b/g/n wireless LAN and Bluetooth 4.2, along with support for Bluetooth Low Energy (BLE), and modular compliance certification.
The board has a microSD card slot, a CSI-2 camera connector, a USB On-The-Go (OTG) port, and an unpopulated footprint for a HAT-compatible 40-pin GPIO header. It is powered via a micro USB socket. Video output is via a mini HDMI port; composite video output can easily be made available via test points if needed.
Sharing the same form factor as the original Raspberry Pi Zero, Raspberry Pi Zero 2 W fits inside most existing Raspberry Pi Zero cases.SKU: SC0721 - Embedded Development Kits & Accessories, Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi Zero WH with Pre-soldered GPIO Headers
Embedded Development Kits & Accessories, Raspberry Pi, RASPBERRY PI STORE, Single Board ComputersRaspberry Pi Zero WH with Pre-soldered GPIO Headers
1 GHz, single-core CPU
512MB RAM
Mini HDMI and USB On-The-Go ports
Micro USB power
HAT-compatible 40-pin header
Composite video and reset headers
CSI camera connector
802.11 b/g/n wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)SKU: SC0065 - Development Board Enclosures, Enclosures, Boxes & Cases, Raspberry Pi
RPI Official Case for Pi4
Specifications
The official Raspberry Pi case for Raspberry Pi 4
- High-quality, two-part ABS construction
- Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
SKU: n/a - Memory, Raspberry Pi
SDSDQAD-016G, 16GB uSD Card pre-programmed
Product description
Providing you the high capacity to meet the needs of today’s business professional. Whether you are stuck in an airport or taking a taxi to your next big pitch, SanDisk mobile memory cards enable you to meet deadlines by plugging your files directly into most phones with a microSD card slot, providing convenience and reliability. Class 4 Speed performance rating.
SKU: SWB04003 - PIMORONI STORE, Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi 400UK, Unit Only
The?Raspberry Pi 400?is a complete personal computer built into a compact keyboard!
The Pi400 is ideal for learning to code using the Raspberry Pi OS desktop environment and can also be used for a wide range of other activities such as surfing the web, creating and editing documents, watching videos and more!
SKU: SWB02002 - Embedded Development Kits & Accessories, Raspberry Pi
KSA-15E-051300HK official Power Supply, UK UCON 00978
Embedded Development Kits & Accessories, Raspberry PiKSA-15E-051300HK official Power Supply, UK UCON 00978
The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019. Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.
SKU: SWB01001 - Other Embedded Computers, Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi 4 Model B
Other Embedded Computers, Raspberry Pi, RASPBERRY PI STORE, Single Board ComputersRaspberry Pi 4 Model B
- 1.5GHz 64-bit quad-core CPU
- Available with 2GB, 4GB or 8GB RAM (select above)
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2x USB 3.0 ports; 2x USB 2.0 ports.
- Raspberry Pi standard 40 pin GPIO header
- 2 ? micro-HDMI ports (up to 4kp60 supported)
- 2-lane MIPI DSI display port
- 2-lane MIPI CSI camera port
- 4-pole stereo audio and composite video port
- 265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
- OpenGL ES 3.0 graphics
- Micro-SD card slot for loading operating system and data storage
- 5V DC via USB-C connector (minimum 3A*)
- 5V DC via GPIO header (minimum 3A*)
- Power over Ethernet (PoE) enabled (requires separate?PoE HAT?)
SKU: n/a
