Uncategorized
Showing all 4 results
- Uncategorized
Camera Module 3 NoIR
Specification
Sensor: Sony IMX708
Resolution: 11.9 megapixels
Sensor size: 7.4mm sensor diagonal
Pixel size: 1.4μm × 1.4μm
Horizontal/vertical: 4608 × 2592 pixels
Common video modes: 1080p50, 720p100, 480p120
Output: RAW10
IR cut filter: Integrated in standard variants; not present in NoIR variants
Autofocus system: Phase Detection Autofocus
Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
Ribbon cable length: 200mm
Cable connector: 15 × 1mm FPC
Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device
Electromagnetic Compatibility Directive (EMC) 2014/30/EU
Restriction of Hazardous Substances (RoHS) Directive
2011/65/EUProduction lifetime: Raspberry Pi Camera Module 3 will remain in production until
at least January 2030
SKU: n/a - Uncategorized
Official Raspberry Pi 27W USB-C Power Supply for Pi 5
Specification
Input voltage: 100 – 240 v.a.c
Input AC frequency: 50-60Hz
Output voltage: 5.1V
Output current: 5.0A
Output power: 25.5W
Average active efficiency: 89.0%
Efficiency at low load (10 %): 87.9%
No-load power consumption: 0.1W
Connector: USB-C
Cable: 1.2m 17AWG, white or black
SKU: SC1149 - Uncategorized
Raspberry Pi 500
Specification
Processor:
2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with
cryptography extensions, 512KB per-core L2 caches and a
2MB shared L3 cache
Memory:
8GB LPDDR4X-4267 SDRAM
Connectivity:
Dual-band (2.4GHz and 5.0GHz) IEEE 802.11b/g/n/ac Wi-Fi
®
Bluetooth 5.0, BLE
Gigabit Ethernet
2 × USB 3.0 ports and 1 × USB 2.0 port
GPIO:
Horizontal 40-pin GPIO header
Video & sound:
2 × micro HDMI ports (supports up to 4Kp60)
Multimedia:
H.265 (4Kp60 decode);
OpenGL ES 3.0 graphics
SD card support:
microSD card slot for operating system and data storage
Keyboard:
78-, 79- or 83-key compact keyboard
(depending on regional variant)
Power:
5V DC via USB connector
Operating temperature: 0°C to +50°C
Dimensions:
286 mm × 122 mm × 23 mm (maximum)
Production lifetime:
Raspberry Pi 500 will remain in production until at least
January 2034
SKU: n/a - RASPBERRY PI STORE, Uncategorized
Raspberry Pi Debug Probe
Specification
Form factor: 22mm × 32mm
Features: • USB to two-wire serial debug bridge (Arm Serial Wire Debug
supported by default)
• USB to UART bridge
• Compatible with the CMSIS-DAP standard
• Works with OpenOCD and other tools supporting CMSIS-DAP
• Follows the Raspberry Pi 3-pin Debug Connector Specification
Included: • High-quality plastic case
• USB cable
• Three debug cables:
• 3-pin JST connector to 3-pin JST connector cable
• 3-pin JST connector to 0.1-inch header (female)
• 3-pin JST connector to 0.1-inch header (male)
Nominal I/O voltage: 3.3V
Operating temperature: -20°C to +70°CSKU: SC0889