No products in the cart.
RASPBERRY PI STORE
Raspberry Pi PoE+ HAT
Availability:
Out of stock
The Raspberry Pi PoE+ HAT is a new version of the original Raspberry Pi PoE HAT, now with 5V 4A output for the most demanding Raspberry Pi applications! It?is designed to replace the original PoE HAT in all new and existing designs?and meets all requirements of the IEEE 802.3af (802.3at Type 1) specifications.
The Raspberry Pi PoE+ HAT is a new version of the original Raspberry Pi PoE HAT, now with 5V 4A output for the most demanding Raspberry Pi applications! It?is designed to replace the original PoE HAT in all new and existing designs?and meets all requirements of the IEEE 802.3af (802.3at Type 1) specifications.
The PoE+ HAT is an add-on board for Raspberry Pi boards with PoE (Power over Ethernet) pins i.e. the?Raspberry Pi 4??and?Raspberry Pi 3B+?.
It is used to power a Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network. The HAT also includes a fan that will cool the Raspberry Pi processor.
The cooling fan is temperature-controlled, which?starts to spin (at a slow speed initially) at 40 degrees. The fan then speeds up as the temperature increases (around every additional 5 degrees) ensuring cool and quiet operation.
We also offer a great PoE+ HAT case here!?
Important Notes
- An up to date copy of Raspberry Pi OS (and the latest kernel) is required for this HAT to function correctly. We recommend a fresh install of Raspberry Pi OS.
- Take care when separating the HAT from the Pi.?Pull evenly so that it detaches from all the pins at the same rate;?do not pull one end of the connector off before the other!
Raspberry Pi PoE+ HAT Features
- Standard: IEEE 802.3at-2003 PoE
- Input voltage: 37?57?V DC, Class 4 device
- Output power: 5V DC /?4?A
- Cooling: 25mm ? 25mm brushless fan delivering 2.2?CFM for processor cooling
- Fully isolated switched-mode power supply
- Fan Control
- Weight: 39g
- Operating temperature: 0??C to +50?C
- Production lifetime: The Raspberry Pi PoE+ HAT will remain in production until at least January 2027
- Compliance: For a full list of local and regional product approvals, please visit?www.raspberrypi.org/compliance
Package Contents
- Raspberry Pi PoE Plus HAT
- GPIO Header
- Standoffs and fixings
Also required
- A PoE-compatible Raspberry Pi?
- Power-sourcing equipment for an 802.3af Power over Ethernet network (such as a?PoE Injector??or PoE-compatible Router/Switch)
- Ethernet cable?
Additional information
- No modification to the Raspberry Pi board is required for this product to?function
- Please ensure that your Raspberry Pi software is up to date for all functionality to be available
PoE+ HAT Dimensions
The Raspberry Pi PoE+ HAT’s overall dimensions are?56.5mm x 65mm (identical to the original PoE HAT).
Based on 0 reviews
Be the first to review “Raspberry Pi PoE+ HAT”
Related products
- RASPBERRY PI STORE
OFFICIAL RASPBERRY PI 4 DESKTOP KIT ONLY
SPECIFICATIONS
The Raspberry Pi 4 Desktop kit is supplied with:
- Raspberry Pi Keyboard & Mouse
- Micro HDMI to Standard HDMI (A/M) 1m Cables
- Raspberry Pi 15.3W USB-C Power Supply
- Raspberry Pi 4 Case
- Official Raspberry Pi Beginner’s Guide (English language)
- 16GB NOOBS with Raspbian microSD card
SKU: SC0400UK - Uncategorized, RASPBERRY PI STORE
Raspberry Pi Debug Probe
Specification
Form factor: 22mm × 32mm
Features: • USB to two-wire serial debug bridge (Arm Serial Wire Debug
supported by default)
• USB to UART bridge
• Compatible with the CMSIS-DAP standard
• Works with OpenOCD and other tools supporting CMSIS-DAP
• Follows the Raspberry Pi 3-pin Debug Connector Specification
Included: • High-quality plastic case
• USB cable
• Three debug cables:
• 3-pin JST connector to 3-pin JST connector cable
• 3-pin JST connector to 0.1-inch header (female)
• 3-pin JST connector to 0.1-inch header (male)
Nominal I/O voltage: 3.3V
Operating temperature: -20°C to +70°CSKU: SC0889 - Accessories, Enclosures, Boxes & Cases, Enclosures, Racks & Cabinets, RASPBERRY PI STORE
Raspberry Pi 5 Official Case
Accessories, Enclosures, Boxes & Cases, Enclosures, Racks & Cabinets, RASPBERRY PI STORERaspberry Pi 5 Official Case
Specification
Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5.
Fan speed control: Pulse width modulation control with tachometer
Maximum airflow: 2.79 CFM Maximum fan speed: 8000 RPM +/- 15%
Case material: ABS (base, frame, lid) and PC (fan assemblySKU: SC1159 - Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi AI Kit
The Raspberry Pi AI Kit bundles the Raspberry Pi M.2 HAT+ with a Hailo AI acceleration module for use with Raspberry Pi 5. It provides an accessible, cost-effective, and power efficient way to integrate high-performance AI. Explore applications including process control, security, home automation, and robotics.
Contains:
- a Hailo AI module containing a Neural Processing Unit (NPU)
- a Raspberry Pi M.2 HAT+, to connect the AI module to your Raspberry Pi 5
- a thermal pad pre-fitted between the module and the M.2 HAT+
- a mounting hardware kit
- a 16mm stacking GPIO header
The AI module is a 13 tera-operations per second (TOPS) neural network inference accelerator built around the Hailo-8L chip. The module uses the M.2 2242 form factor, and comes pre-installed in the M.2 HAT+, to which it connects through an M key edge connector. The M.2 HAT+ communicates between the AI module’s M.2 interface and the Raspberry Pi 5’s PCIe 2.0 interface.
When the host Raspberry Pi 5 is running an up-to-date Raspberry Pi OS image, it automatically detects the Hailo module and makes the NPU available for AI computing tasks. The built-in rpicam-apps camera applications in Raspberry Pi OS natively support the AI module, automatically using the NPU to run compatible post-processing tasks.
SKU: SC1438 - RASPBERRY PI STORE
Raspberry Pi Pico WH.
Overview
The Raspberry Pico W and Pico WH (with Headers) is a microcontroller based developement board. At this heart is a RP2040 microcontroller chip designed by Raspberry Pi in UK. It features a Dual Core ARM Cortex-M0+ processor running upto 133 MHz with 264 KB of on-chip SRAM. The Pico also has a 2 MB of onboard Flash memory, providing enough space for code and data storage.
The “W” in the Pico W standards for wireless connectivity. Pico W offers offers 2.4GHz 802.11 b/g/n wireless LAN support and Bluetooth 5.2, with an on-board antenna, and modular compliance certification. It can be operated in both station and access point modes.
Pico has extensive I/O capabilities with 26 GPIO Pins, including 3 Analog Inputs and lots of interfacing options including 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels. Moreover, 26 of the GPIO pins are multi-function, which means we can configure those pins to a different behavior like UART/I2C/SPI/GPIO.
It includes a USB 1.1 with device and host support, allowing easy connection to PCs or other USB devices, this enables drag-and-drop programming feature that simplifies the process of loading and updating code on the device using mass storage over USB.
Features
- Castellated module allows soldering direct to carrier boards (Raspberry Pi Pico and Pico W only)
- Drag-and-drop programming using mass storage over USB
- Low-power sleep and dormant modes
- Accurate on-chip clock
- Temperature sensor
- Accelerated integer and floating-point libraries on-chip
SKU: SWB04002-1-1
There are no reviews yet.