-
×
Raspberry Pi 5 Official Case
1 × ₦22,300
Raspberry Pi 5 Official Case Subtotal: ₦22,300
RASPBERRY PI STORE
Raspberry Pi PoE+ HAT
Availability:
Out of stock
The Raspberry Pi PoE+ HAT is a new version of the original Raspberry Pi PoE HAT, now with 5V 4A output for the most demanding Raspberry Pi applications! It?is designed to replace the original PoE HAT in all new and existing designs?and meets all requirements of the IEEE 802.3af (802.3at Type 1) specifications.
The Raspberry Pi PoE+ HAT is a new version of the original Raspberry Pi PoE HAT, now with 5V 4A output for the most demanding Raspberry Pi applications! It?is designed to replace the original PoE HAT in all new and existing designs?and meets all requirements of the IEEE 802.3af (802.3at Type 1) specifications.
The PoE+ HAT is an add-on board for Raspberry Pi boards with PoE (Power over Ethernet) pins i.e. the?Raspberry Pi 4??and?Raspberry Pi 3B+?.
It is used to power a Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network. The HAT also includes a fan that will cool the Raspberry Pi processor.
The cooling fan is temperature-controlled, which?starts to spin (at a slow speed initially) at 40 degrees. The fan then speeds up as the temperature increases (around every additional 5 degrees) ensuring cool and quiet operation.
We also offer a great PoE+ HAT case here!?
Important Notes
- An up to date copy of Raspberry Pi OS (and the latest kernel) is required for this HAT to function correctly. We recommend a fresh install of Raspberry Pi OS.
- Take care when separating the HAT from the Pi.?Pull evenly so that it detaches from all the pins at the same rate;?do not pull one end of the connector off before the other!
Raspberry Pi PoE+ HAT Features
- Standard: IEEE 802.3at-2003 PoE
- Input voltage: 37?57?V DC, Class 4 device
- Output power: 5V DC /?4?A
- Cooling: 25mm ? 25mm brushless fan delivering 2.2?CFM for processor cooling
- Fully isolated switched-mode power supply
- Fan Control
- Weight: 39g
- Operating temperature: 0??C to +50?C
- Production lifetime: The Raspberry Pi PoE+ HAT will remain in production until at least January 2027
- Compliance: For a full list of local and regional product approvals, please visit?www.raspberrypi.org/compliance
Package Contents
- Raspberry Pi PoE Plus HAT
- GPIO Header
- Standoffs and fixings
Also required
- A PoE-compatible Raspberry Pi?
- Power-sourcing equipment for an 802.3af Power over Ethernet network (such as a?PoE Injector??or PoE-compatible Router/Switch)
- Ethernet cable?
Additional information
- No modification to the Raspberry Pi board is required for this product to?function
- Please ensure that your Raspberry Pi software is up to date for all functionality to be available
PoE+ HAT Dimensions
The Raspberry Pi PoE+ HAT’s overall dimensions are?56.5mm x 65mm (identical to the original PoE HAT).
Based on 0 reviews
Be the first to review “Raspberry Pi PoE+ HAT”
Related products
- RASPBERRY PI STORE
Raspberry Pi 400 Personal Computer Kit
Featuring a quad-core 64-bit processor, 4GB of RAM, wireless networking, dual-display output, and 4K video playback, as well as a 40-pin GPIO header, Raspberry Pi 400 is a powerful, easy-to-use computer built into a neat and portable keyboard.
It?s ideal for learning to code using the Raspberry Pi OS desktop environment and can also be used for a wide range of other activities such as surfing the web, creating and editing documents, watching videos and more!
SKU: SWB02001 - Uncategorized, RASPBERRY PI STORE
Raspberry Pi Debug Probe
Specification
Form factor: 22mm × 32mm
Features: • USB to two-wire serial debug bridge (Arm Serial Wire Debug
supported by default)
• USB to UART bridge
• Compatible with the CMSIS-DAP standard
• Works with OpenOCD and other tools supporting CMSIS-DAP
• Follows the Raspberry Pi 3-pin Debug Connector Specification
Included: • High-quality plastic case
• USB cable
• Three debug cables:
• 3-pin JST connector to 3-pin JST connector cable
• 3-pin JST connector to 0.1-inch header (female)
• 3-pin JST connector to 0.1-inch header (male)
Nominal I/O voltage: 3.3V
Operating temperature: -20°C to +70°CSKU: SC0889 - Embedded Development Kits & Accessories, Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi Zero WH with Pre-soldered GPIO Headers
Embedded Development Kits & Accessories, Raspberry Pi, RASPBERRY PI STORE, Single Board ComputersRaspberry Pi Zero WH with Pre-soldered GPIO Headers
1 GHz, single-core CPU
512MB RAM
Mini HDMI and USB On-The-Go ports
Micro USB power
HAT-compatible 40-pin header
Composite video and reset headers
CSI camera connector
802.11 b/g/n wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)SKU: SC0065 - Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi Zero 2 W with Headers
Raspberry Pi Zero 2 W is the latest product in our most affordable range of single-board computers. The successor to the breakthrough Raspberry Pi Zero W, Raspberry Pi Zero 2 W is a form factor–compatible drop-in replacement for the original board.
The board incorporates a quad-core 64-bit Arm Cortex-A53 CPU, clocked at 1GHz. At its heart is a Raspberry Pi RP3A0 system-in-package (SiP), integrating a Broadcom BCM2710A1 die with 512MB of LPDDR2 SDRAM. The upgraded processor provides Raspberry Pi Zero 2 W with 40% more single-threaded performance, and five times more multi-threaded performance, than the original single-core Raspberry Pi Zero.
Raspberry Pi Zero 2 W offers 2.4GHz 802.11 b/g/n wireless LAN and Bluetooth 4.2, along with support for Bluetooth Low Energy (BLE), and modular compliance certification.
The board has a microSD card slot, a CSI-2 camera connector, a USB On-The-Go (OTG) port, and an unpopulated footprint for a HAT-compatible 40-pin GPIO header. It is powered via a micro USB socket. Video output is via a mini HDMI port; composite video output can easily be made available via test points if needed.
Sharing the same form factor as the original Raspberry Pi Zero, Raspberry Pi Zero 2 W fits inside most existing Raspberry Pi Zero cases.SKU: SC0721 - RASPBERRY PI STORE
Raspberry Pi Pico
The?Raspberry Pi Pico?is an entirely new type of microcontroller from Raspberry Pi. Small, cheap and flexible – it?s great for learning to code with MicroPython!
This is?the standard?Raspberry Pi Pico?- which comes without any?headers??fitted. You can also?purchase our pre-soldered Raspberry Pi Pico here?.
Whether you?re looking to learn about the MicroPython programming language, take your first steps in physical computing or want to build a hardware project, the Raspberry Pi Pico ? and its amazing community ? will support you every step of the way.?We also have a great range of accessories for the Pico too!
SKU: SWB04002
There are no reviews yet.