-
×
Raspberry Pi Pico WH.
1 × ₦14,400
Subtotal: ₦14,400
RASPBERRY PI STORE
Raspberry Pi PoE+ HAT
Availability:
Out of stock
The Raspberry Pi PoE+ HAT is a new version of the original Raspberry Pi PoE HAT, now with 5V 4A output for the most demanding Raspberry Pi applications! It?is designed to replace the original PoE HAT in all new and existing designs?and meets all requirements of the IEEE 802.3af (802.3at Type 1) specifications.
The Raspberry Pi PoE+ HAT is a new version of the original Raspberry Pi PoE HAT, now with 5V 4A output for the most demanding Raspberry Pi applications! It?is designed to replace the original PoE HAT in all new and existing designs?and meets all requirements of the IEEE 802.3af (802.3at Type 1) specifications.
The PoE+ HAT is an add-on board for Raspberry Pi boards with PoE (Power over Ethernet) pins i.e. the?Raspberry Pi 4??and?Raspberry Pi 3B+?.
It is used to power a Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network. The HAT also includes a fan that will cool the Raspberry Pi processor.
The cooling fan is temperature-controlled, which?starts to spin (at a slow speed initially) at 40 degrees. The fan then speeds up as the temperature increases (around every additional 5 degrees) ensuring cool and quiet operation.
We also offer a great PoE+ HAT case here!?
Important Notes
- An up to date copy of Raspberry Pi OS (and the latest kernel) is required for this HAT to function correctly. We recommend a fresh install of Raspberry Pi OS.
- Take care when separating the HAT from the Pi.?Pull evenly so that it detaches from all the pins at the same rate;?do not pull one end of the connector off before the other!
Raspberry Pi PoE+ HAT Features
- Standard: IEEE 802.3at-2003 PoE
- Input voltage: 37?57?V DC, Class 4 device
- Output power: 5V DC /?4?A
- Cooling: 25mm ? 25mm brushless fan delivering 2.2?CFM for processor cooling
- Fully isolated switched-mode power supply
- Fan Control
- Weight: 39g
- Operating temperature: 0??C to +50?C
- Production lifetime: The Raspberry Pi PoE+ HAT will remain in production until at least January 2027
- Compliance: For a full list of local and regional product approvals, please visit?www.raspberrypi.org/compliance
Package Contents
- Raspberry Pi PoE Plus HAT
- GPIO Header
- Standoffs and fixings
Also required
- A PoE-compatible Raspberry Pi?
- Power-sourcing equipment for an 802.3af Power over Ethernet network (such as a?PoE Injector??or PoE-compatible Router/Switch)
- Ethernet cable?
Additional information
- No modification to the Raspberry Pi board is required for this product to?function
- Please ensure that your Raspberry Pi software is up to date for all functionality to be available
PoE+ HAT Dimensions
The Raspberry Pi PoE+ HAT’s overall dimensions are?56.5mm x 65mm (identical to the original PoE HAT).
Based on 0 reviews
Be the first to review “Raspberry Pi PoE+ HAT”
Related products
- RASPBERRY PI STORE
IC RP2040 (RP2B2) T&R 500
Specification
- Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz
- 264kB on-chip SRAM
- 2 ? UART, 2 ? SPI controllers, 2 ? I2C controllers, 16 ? PWM channels
- 1 ? USB 1.1 controller and PHY, with host and device support
- 8 ? Programmable I/O (PIO) state machines for custom peripheral support
- Supported input power 1.8?5.5V DC
- Operating temperature -40?C to +85?C
- Drag-and-drop programming using mass storage over USB
- Low-power sleep and dormant modes
- Accurate on-chip clock
- Temperature sensor
- Accelerated integer and floating-point libraries on-chip
SKU: SC0914(7) - Raspberry Pi, RASPBERRY PI STORE
Raspberry Pi AI Kit
The Raspberry Pi AI Kit bundles the Raspberry Pi M.2 HAT+ with a Hailo AI acceleration module for use with Raspberry Pi 5. It provides an accessible, cost-effective, and power efficient way to integrate high-performance AI. Explore applications including process control, security, home automation, and robotics.
Contains:
- a Hailo AI module containing a Neural Processing Unit (NPU)
- a Raspberry Pi M.2 HAT+, to connect the AI module to your Raspberry Pi 5
- a thermal pad pre-fitted between the module and the M.2 HAT+
- a mounting hardware kit
- a 16mm stacking GPIO header
The AI module is a 13 tera-operations per second (TOPS) neural network inference accelerator built around the Hailo-8L chip. The module uses the M.2 2242 form factor, and comes pre-installed in the M.2 HAT+, to which it connects through an M key edge connector. The M.2 HAT+ communicates between the AI module’s M.2 interface and the Raspberry Pi 5’s PCIe 2.0 interface.
When the host Raspberry Pi 5 is running an up-to-date Raspberry Pi OS image, it automatically detects the Hailo module and makes the NPU available for AI computing tasks. The built-in rpicam-apps camera applications in Raspberry Pi OS natively support the AI module, automatically using the NPU to run compatible post-processing tasks.
SKU: SC1438 - Embedded Development Kits & Accessories, Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi Zero WH with Pre-soldered GPIO Headers
Embedded Development Kits & Accessories, Raspberry Pi, RASPBERRY PI STORE, Single Board ComputersRaspberry Pi Zero WH with Pre-soldered GPIO Headers
1 GHz, single-core CPU
512MB RAM
Mini HDMI and USB On-The-Go ports
Micro USB power
HAT-compatible 40-pin header
Composite video and reset headers
CSI camera connector
802.11 b/g/n wireless LAN
Bluetooth 4.1
Bluetooth Low Energy (BLE)SKU: SC0065 - RASPBERRY PI STORE
Argon IR Remote for Argon ONE V2 and M.2 Cases
The Argon40 IR remote is the ultimate media centre accessory for owners of the?Argon ONE V2??and?Argon ONE M.2??cases for the Raspberry Pi!
This stylish remote feels great in the hand works out of the box with the Argon ONE V2 and Argon ONE M.2 to control power on and off, and with a simple software installation, you can take advantage of the full remote button set with Raspberry Pi OS or?LibreELEC?(Kodi)!
SKU: n/a
There are no reviews yet.