No products in the cart.
Single Board Computers
Showing all 6 results
- Computer Products, Single Board Computers
CM4 IO Computer – (A Computer Based on Raspberry Pi Compute Module 4)
Computer Products, Single Board ComputersCM4 IO Computer – (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
- 2 x full-size HDMI 2.0 connectors
- 2 x USB 2.0 connectors
- Gigabit Ethernet RJ45 with PoE support
- MicroSD card socket for Compute Module 4 Lite variants
- PCIe Gen 2 x1 socket
- Standard fan connector
- Real-time clock with battery socket
SKU: n/a - Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi Pico 2
Specification
Form factor: 21 mm × 51 mm
CPU: Dual Arm Cortex-M33 or dual RISC-V Hazard3 processors @ 150MHz
Memory: 520 KB on-chip SRAM; 4 MB on-board QSPI flash
Interfacing: 26 multi-purpose GPIO pins, including 4 that can be used for ADC
Peripherals: • 2 × UART
• 2 × SPI controllers
• 2 × I2C controllers
• 24 × PWM channels
• 1 × USB 1.1 controller and PHY, with host and device support
• 12 × PIO state machines
Input power: 1.8–5.5V DC
Operating temperature: -20°C to +85°CSKU: SC1631 - Other Embedded Computers, Raspberry Pi, RASPBERRY PI STORE, Single Board Computers
Raspberry Pi 4 Model B
Other Embedded Computers, Raspberry Pi, RASPBERRY PI STORE, Single Board ComputersRaspberry Pi 4 Model B
- 1.5GHz 64-bit quad-core CPU
- Available with 2GB, 4GB or 8GB RAM (select above)
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2x USB 3.0 ports; 2x USB 2.0 ports.
- Raspberry Pi standard 40 pin GPIO header
- 2 ? micro-HDMI ports (up to 4kp60 supported)
- 2-lane MIPI DSI display port
- 2-lane MIPI CSI camera port
- 4-pole stereo audio and composite video port
- 265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
- OpenGL ES 3.0 graphics
- Micro-SD card slot for loading operating system and data storage
- 5V DC via USB-C connector (minimum 3A*)
- 5V DC via GPIO header (minimum 3A*)
- Power over Ethernet (PoE) enabled (requires separate?PoE HAT?)
SKU: n/a - Single Board Computers
Raspberry Pi 3 Model B+
The Raspberry Pi 3 Model B+ is the final revision in the Raspberry Pi 3 range.
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 1GB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
- Extended 40-pin GPIO header
- Full-size HDMI
- 4 USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi camera
- DSI display port for connecting a Raspberry Pi touchscreen display
- 4-pole stereo output and composite video port
- Micro SD port for loading your operating system and storing data
- 5V/2.5A DC power input
- Power-over-Ethernet (PoE) support (requires separate PoE HAT)
SKU: 60000 - Single Board Computers
Raspberry Pi 3 Model B+
The Raspberry Pi 3 Model B+ is the final revision in the Raspberry Pi 3 range.
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 1GB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
- Extended 40-pin GPIO header
- Full-size HDMI
- 4 USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi camera
- DSI display port for connecting a Raspberry Pi touchscreen display
- 4-pole stereo output and composite video port
- Micro SD port for loading your operating system and storing data
- 5V/2.5A DC power input
- Power-over-Ethernet (PoE) support (requires separate PoE HAT)
SKU: n/a
