IoTHotspot M1
Specifications
Processing capability:
580MHz MIPS processor
128MB or 256MB DDR
Wired interface 1x 10 / 100M Ethernet
Wireless communication:
2.4GHz 802.11 b/g/n wireless LAN
Bluetooth 4.2, BLE
External Antenna
Storage 16MB or 32MB Flash
LoRa Concentrator Semtech SX1302 + SX1250
Security Built-in ATECC608A crypto device
Frequency Band Support:
868 ~ 870 MHz (EU868, IN865, RU864)
902 ~ 928 MHz (US915, AU915, KR920, AS923-1/2/3)
Sensitivity -125dBm @125KHz/SF7
-139dBm @125KHz/SF12
TX Power Up to 27dBm
Antenna
1x WiFi / BT external Antenna
1x 2.5dBi LoRa Antenna
Optional 5.8dBi LoRa Antenna
LED Indicator 1x RGB LED
Button 1x Button for Hotspot Configuration
Power Supply DC 7.5 V ~ 18V
Operating Temperature 0°C to 50°C
Relative Humidity 0% – 90%
Heat Dissipation Aluminum enclosure
Dimension 95mm(L) x 95mm(W) x 26mm(H)
Iot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Iot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
ED-GW1302S LoRaWAN Gateway Module
Features
CM4 Sensing (Sensing IoT World by Raspberry Pi Powered Industrial Computer)
Highlight
CM4 Nano – (The Industrial Raspberry Pi that You Expect)
ED-CM4NANO provides 2 channels USB3.0 and 1-channel USB2.0 interfaces, and the USB2.0 interface can be used to update the system image. ED-CM4NANO provides very strong expansion capabilities, supports a standard Raspberry Pi 40-pin expansion interface, and users can mechanical-easily expand high-speed equipment through an onboard USB 3.0 Type C interface.
The system supports +12V~18VDC power input, and the 40PIN socket provides 5V@2A and 3.3V@1.5A output power and supports high-power expansion modules.
The dimension of ED-CM4NANO PCB is 95*58mm, which is slightly larger than Pi4 Model B. The
connectors come out from the front and back end, a 103*62mm*5mm heat sink provides excellent cooling performance for the CPU, wireless module and PMU, and the whole system can work reliably in a high-temperature environment.
Based on our real testing in the lab, ED-CM4NANO can work reliably at an ambient temperature of -25~60°C. Four M2.5 screw holes are reserved at the case bottom of the ED-CM4NANO, which is convenient for users to install the ED-CM4NANO on other equipment. ED-CM4NANO also supports DIN rail mounting.
Highlight
the system, Supports DIN-rail mounting
CM4 IO Case For Raspberry Pi Compute Module 4 IO Computer
Specifications
One-Click Switch
The one-click switch is to control the system power on and shut off by GPIO3 on a 40pin connector & the software running on Compute Module 4.
Hardware Protection
The case perfectly fits the mechanicals of the Raspberry Pi Compute Module 4 IO Board, and all interfaces are led out of the enclosure.
The metal case provides excellent shielding and protection for Compute Module 4 & IO Board.
Fix Compute Module 4
The four nuts at the bottom of the case can help to fix the Compute Module 4 on the IO board & case reliably. There are four 1.5mm height black nylon washers to support Compute Module 4 on the four corners of the PCB. This feature prevents PCB deformation and circuit damage when the Compute Module 4 is screwed on the IO board without
something to support.
Cooling Compute Module 4
A 12V/60mA silent fan is installed directly over the Compute Module 4, which is isolated from the case by four silicone washers, these silicone washers greatly reduce the noise magnification by the case. The fan can reduce the CPU temperature by a maximal 20°C and heat generated by the whole system is dissipated by the fan through the slots at the sides of the case.
External Antenna Raspberry Pi’s officially certified 2.4G/5.8GHz WiFi/Bluetooth Antenna is installed on the case.
Battery Offer Philips CR2032 Eco-friendly to enable RTC function.
Dimension 171.5(L) x 109.5(W) x 28.5(H) mm
Weight 450g
CM4 IO Computer – (A Computer Based on Raspberry Pi Compute Module 4)
CM4 IO Computer – (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
PI400 GPIO PROTECTOR
The IO board comes with a 40pin ribbon cable, which is Grey and rainbow colour optional, 40pin black male connector with anti-reverse insertion at one end is to connect the 40pin female connector at the back of the Pi 400, the user can install the daughter board on the IO board.
All of the materials used on this product are RoHS compliant.
13Amp Double Socket with USB Port
Easy installation, supplied with captive screws and backed-out terminals
Covers to conceal fixing screws
Material: PVC.
Number of gangs:2
Socket: 3-pin plug
Amps: 13A.
Power Voltage Supply:240V
Profile Type: Square Edge
13Amp Double Socket
Easy installation, supplied with captive screws and backed-out terminals
Covers to conceal fixing screws
Material: PVC.
Colour: white.
Number of gangs:2
Socket: 3-pin plug
Amps: 13A.
Power Voltage Supply:240V
Profile Type: Square Edge
13Amp Single Socket
Easy installation, supplied with captive screws and backed-out terminals
Covers to conceal fixing screws
Material: PVC.
Colour: white.
Number of gangs:2
Socket: 3-pin plug
Amps: 13A.
Power Voltage Supply:240V
Profile Type: Square Edge
45Amp W/H Switch
20Amp AC Switch
3 Gang Light Switch
Catch Daily Deals!
Go to Daily Deals SectionTrending products
See all trending productsIoTHotspot M1
Specifications
Processing capability:
580MHz MIPS processor
128MB or 256MB DDR
Wired interface 1x 10 / 100M Ethernet
Wireless communication:
2.4GHz 802.11 b/g/n wireless LAN
Bluetooth 4.2, BLE
External Antenna
Storage 16MB or 32MB Flash
LoRa Concentrator Semtech SX1302 + SX1250
Security Built-in ATECC608A crypto device
Frequency Band Support:
868 ~ 870 MHz (EU868, IN865, RU864)
902 ~ 928 MHz (US915, AU915, KR920, AS923-1/2/3)
Sensitivity -125dBm @125KHz/SF7
-139dBm @125KHz/SF12
TX Power Up to 27dBm
Antenna
1x WiFi / BT external Antenna
1x 2.5dBi LoRa Antenna
Optional 5.8dBi LoRa Antenna
LED Indicator 1x RGB LED
Button 1x Button for Hotspot Configuration
Power Supply DC 7.5 V ~ 18V
Operating Temperature 0°C to 50°C
Relative Humidity 0% – 90%
Heat Dissipation Aluminum enclosure
Dimension 95mm(L) x 95mm(W) x 26mm(H)
Iot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Iot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
ED-GW1302S LoRaWAN Gateway Module
Features
CM4 Sensing (Sensing IoT World by Raspberry Pi Powered Industrial Computer)
Highlight
CM4 Nano – (The Industrial Raspberry Pi that You Expect)
ED-CM4NANO provides 2 channels USB3.0 and 1-channel USB2.0 interfaces, and the USB2.0 interface can be used to update the system image. ED-CM4NANO provides very strong expansion capabilities, supports a standard Raspberry Pi 40-pin expansion interface, and users can mechanical-easily expand high-speed equipment through an onboard USB 3.0 Type C interface.
The system supports +12V~18VDC power input, and the 40PIN socket provides 5V@2A and 3.3V@1.5A output power and supports high-power expansion modules.
The dimension of ED-CM4NANO PCB is 95*58mm, which is slightly larger than Pi4 Model B. The
connectors come out from the front and back end, a 103*62mm*5mm heat sink provides excellent cooling performance for the CPU, wireless module and PMU, and the whole system can work reliably in a high-temperature environment.
Based on our real testing in the lab, ED-CM4NANO can work reliably at an ambient temperature of -25~60°C. Four M2.5 screw holes are reserved at the case bottom of the ED-CM4NANO, which is convenient for users to install the ED-CM4NANO on other equipment. ED-CM4NANO also supports DIN rail mounting.
Highlight
the system, Supports DIN-rail mounting
CM4 IO Case For Raspberry Pi Compute Module 4 IO Computer
Specifications
One-Click Switch
The one-click switch is to control the system power on and shut off by GPIO3 on a 40pin connector & the software running on Compute Module 4.
Hardware Protection
The case perfectly fits the mechanicals of the Raspberry Pi Compute Module 4 IO Board, and all interfaces are led out of the enclosure.
The metal case provides excellent shielding and protection for Compute Module 4 & IO Board.
Fix Compute Module 4
The four nuts at the bottom of the case can help to fix the Compute Module 4 on the IO board & case reliably. There are four 1.5mm height black nylon washers to support Compute Module 4 on the four corners of the PCB. This feature prevents PCB deformation and circuit damage when the Compute Module 4 is screwed on the IO board without
something to support.
Cooling Compute Module 4
A 12V/60mA silent fan is installed directly over the Compute Module 4, which is isolated from the case by four silicone washers, these silicone washers greatly reduce the noise magnification by the case. The fan can reduce the CPU temperature by a maximal 20°C and heat generated by the whole system is dissipated by the fan through the slots at the sides of the case.
External Antenna Raspberry Pi’s officially certified 2.4G/5.8GHz WiFi/Bluetooth Antenna is installed on the case.
Battery Offer Philips CR2032 Eco-friendly to enable RTC function.
Dimension 171.5(L) x 109.5(W) x 28.5(H) mm
Weight 450g
CM4 IO Computer – (A Computer Based on Raspberry Pi Compute Module 4)
CM4 IO Computer – (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
PI400 GPIO PROTECTOR
The IO board comes with a 40pin ribbon cable, which is Grey and rainbow colour optional, 40pin black male connector with anti-reverse insertion at one end is to connect the 40pin female connector at the back of the Pi 400, the user can install the daughter board on the IO board.
All of the materials used on this product are RoHS compliant.
Laptops & Computers
IoTHotspot M1
Specifications
Processing capability:
580MHz MIPS processor
128MB or 256MB DDR
Wired interface 1x 10 / 100M Ethernet
Wireless communication:
2.4GHz 802.11 b/g/n wireless LAN
Bluetooth 4.2, BLE
External Antenna
Storage 16MB or 32MB Flash
LoRa Concentrator Semtech SX1302 + SX1250
Security Built-in ATECC608A crypto device
Frequency Band Support:
868 ~ 870 MHz (EU868, IN865, RU864)
902 ~ 928 MHz (US915, AU915, KR920, AS923-1/2/3)
Sensitivity -125dBm @125KHz/SF7
-139dBm @125KHz/SF12
TX Power Up to 27dBm
Antenna
1x WiFi / BT external Antenna
1x 2.5dBi LoRa Antenna
Optional 5.8dBi LoRa Antenna
LED Indicator 1x RGB LED
Button 1x Button for Hotspot Configuration
Power Supply DC 7.5 V ~ 18V
Operating Temperature 0°C to 50°C
Relative Humidity 0% – 90%
Heat Dissipation Aluminum enclosure
Dimension 95mm(L) x 95mm(W) x 26mm(H)
Iot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Iot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
ED-GW1302S LoRaWAN Gateway Module
Features
CM4 Sensing (Sensing IoT World by Raspberry Pi Powered Industrial Computer)
Highlight
CM4 Nano – (The Industrial Raspberry Pi that You Expect)
ED-CM4NANO provides 2 channels USB3.0 and 1-channel USB2.0 interfaces, and the USB2.0 interface can be used to update the system image. ED-CM4NANO provides very strong expansion capabilities, supports a standard Raspberry Pi 40-pin expansion interface, and users can mechanical-easily expand high-speed equipment through an onboard USB 3.0 Type C interface.
The system supports +12V~18VDC power input, and the 40PIN socket provides 5V@2A and 3.3V@1.5A output power and supports high-power expansion modules.
The dimension of ED-CM4NANO PCB is 95*58mm, which is slightly larger than Pi4 Model B. The
connectors come out from the front and back end, a 103*62mm*5mm heat sink provides excellent cooling performance for the CPU, wireless module and PMU, and the whole system can work reliably in a high-temperature environment.
Based on our real testing in the lab, ED-CM4NANO can work reliably at an ambient temperature of -25~60°C. Four M2.5 screw holes are reserved at the case bottom of the ED-CM4NANO, which is convenient for users to install the ED-CM4NANO on other equipment. ED-CM4NANO also supports DIN rail mounting.
Highlight
the system, Supports DIN-rail mounting
CM4 IO Case For Raspberry Pi Compute Module 4 IO Computer
Specifications
One-Click Switch
The one-click switch is to control the system power on and shut off by GPIO3 on a 40pin connector & the software running on Compute Module 4.
Hardware Protection
The case perfectly fits the mechanicals of the Raspberry Pi Compute Module 4 IO Board, and all interfaces are led out of the enclosure.
The metal case provides excellent shielding and protection for Compute Module 4 & IO Board.
Fix Compute Module 4
The four nuts at the bottom of the case can help to fix the Compute Module 4 on the IO board & case reliably. There are four 1.5mm height black nylon washers to support Compute Module 4 on the four corners of the PCB. This feature prevents PCB deformation and circuit damage when the Compute Module 4 is screwed on the IO board without
something to support.
Cooling Compute Module 4
A 12V/60mA silent fan is installed directly over the Compute Module 4, which is isolated from the case by four silicone washers, these silicone washers greatly reduce the noise magnification by the case. The fan can reduce the CPU temperature by a maximal 20°C and heat generated by the whole system is dissipated by the fan through the slots at the sides of the case.
External Antenna Raspberry Pi’s officially certified 2.4G/5.8GHz WiFi/Bluetooth Antenna is installed on the case.
Battery Offer Philips CR2032 Eco-friendly to enable RTC function.
Dimension 171.5(L) x 109.5(W) x 28.5(H) mm
Weight 450g
CM4 IO Computer – (A Computer Based on Raspberry Pi Compute Module 4)
CM4 IO Computer – (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
PI400 GPIO PROTECTOR
The IO board comes with a 40pin ribbon cable, which is Grey and rainbow colour optional, 40pin black male connector with anti-reverse insertion at one end is to connect the 40pin female connector at the back of the Pi 400, the user can install the daughter board on the IO board.
All of the materials used on this product are RoHS compliant.
13Amp Double Socket with USB Port
Easy installation, supplied with captive screws and backed-out terminals
Covers to conceal fixing screws
Material: PVC.
Number of gangs:2
Socket: 3-pin plug
Amps: 13A.
Power Voltage Supply:240V
Profile Type: Square Edge
13Amp Double Socket
Easy installation, supplied with captive screws and backed-out terminals
Covers to conceal fixing screws
Material: PVC.
Colour: white.
Number of gangs:2
Socket: 3-pin plug
Amps: 13A.
Power Voltage Supply:240V
Profile Type: Square Edge
13Amp Single Socket
Easy installation, supplied with captive screws and backed-out terminals
Covers to conceal fixing screws
Material: PVC.
Colour: white.
Number of gangs:2
Socket: 3-pin plug
Amps: 13A.
Power Voltage Supply:240V
Profile Type: Square Edge
45Amp W/H Switch
20Amp AC Switch
3 Gang Light Switch
Smartphones & Tablets
IoTHotspot M1
Specifications
Processing capability:
580MHz MIPS processor
128MB or 256MB DDR
Wired interface 1x 10 / 100M Ethernet
Wireless communication:
2.4GHz 802.11 b/g/n wireless LAN
Bluetooth 4.2, BLE
External Antenna
Storage 16MB or 32MB Flash
LoRa Concentrator Semtech SX1302 + SX1250
Security Built-in ATECC608A crypto device
Frequency Band Support:
868 ~ 870 MHz (EU868, IN865, RU864)
902 ~ 928 MHz (US915, AU915, KR920, AS923-1/2/3)
Sensitivity -125dBm @125KHz/SF7
-139dBm @125KHz/SF12
TX Power Up to 27dBm
Antenna
1x WiFi / BT external Antenna
1x 2.5dBi LoRa Antenna
Optional 5.8dBi LoRa Antenna
LED Indicator 1x RGB LED
Button 1x Button for Hotspot Configuration
Power Supply DC 7.5 V ~ 18V
Operating Temperature 0°C to 50°C
Relative Humidity 0% – 90%
Heat Dissipation Aluminum enclosure
Dimension 95mm(L) x 95mm(W) x 26mm(H)
Iot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Iot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
ED-GW1302S LoRaWAN Gateway Module
Features
CM4 Sensing (Sensing IoT World by Raspberry Pi Powered Industrial Computer)
Highlight
CM4 Nano – (The Industrial Raspberry Pi that You Expect)
ED-CM4NANO provides 2 channels USB3.0 and 1-channel USB2.0 interfaces, and the USB2.0 interface can be used to update the system image. ED-CM4NANO provides very strong expansion capabilities, supports a standard Raspberry Pi 40-pin expansion interface, and users can mechanical-easily expand high-speed equipment through an onboard USB 3.0 Type C interface.
The system supports +12V~18VDC power input, and the 40PIN socket provides 5V@2A and 3.3V@1.5A output power and supports high-power expansion modules.
The dimension of ED-CM4NANO PCB is 95*58mm, which is slightly larger than Pi4 Model B. The
connectors come out from the front and back end, a 103*62mm*5mm heat sink provides excellent cooling performance for the CPU, wireless module and PMU, and the whole system can work reliably in a high-temperature environment.
Based on our real testing in the lab, ED-CM4NANO can work reliably at an ambient temperature of -25~60°C. Four M2.5 screw holes are reserved at the case bottom of the ED-CM4NANO, which is convenient for users to install the ED-CM4NANO on other equipment. ED-CM4NANO also supports DIN rail mounting.
Highlight
the system, Supports DIN-rail mounting
CM4 IO Case For Raspberry Pi Compute Module 4 IO Computer
Specifications
One-Click Switch
The one-click switch is to control the system power on and shut off by GPIO3 on a 40pin connector & the software running on Compute Module 4.
Hardware Protection
The case perfectly fits the mechanicals of the Raspberry Pi Compute Module 4 IO Board, and all interfaces are led out of the enclosure.
The metal case provides excellent shielding and protection for Compute Module 4 & IO Board.
Fix Compute Module 4
The four nuts at the bottom of the case can help to fix the Compute Module 4 on the IO board & case reliably. There are four 1.5mm height black nylon washers to support Compute Module 4 on the four corners of the PCB. This feature prevents PCB deformation and circuit damage when the Compute Module 4 is screwed on the IO board without
something to support.
Cooling Compute Module 4
A 12V/60mA silent fan is installed directly over the Compute Module 4, which is isolated from the case by four silicone washers, these silicone washers greatly reduce the noise magnification by the case. The fan can reduce the CPU temperature by a maximal 20°C and heat generated by the whole system is dissipated by the fan through the slots at the sides of the case.
External Antenna Raspberry Pi’s officially certified 2.4G/5.8GHz WiFi/Bluetooth Antenna is installed on the case.
Battery Offer Philips CR2032 Eco-friendly to enable RTC function.
Dimension 171.5(L) x 109.5(W) x 28.5(H) mm
Weight 450g
CM4 IO Computer – (A Computer Based on Raspberry Pi Compute Module 4)
CM4 IO Computer – (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
PI400 GPIO PROTECTOR
The IO board comes with a 40pin ribbon cable, which is Grey and rainbow colour optional, 40pin black male connector with anti-reverse insertion at one end is to connect the 40pin female connector at the back of the Pi 400, the user can install the daughter board on the IO board.
All of the materials used on this product are RoHS compliant.
13Amp Double Socket with USB Port
Easy installation, supplied with captive screws and backed-out terminals
Covers to conceal fixing screws
Material: PVC.
Number of gangs:2
Socket: 3-pin plug
Amps: 13A.
Power Voltage Supply:240V
Profile Type: Square Edge
13Amp Double Socket
Easy installation, supplied with captive screws and backed-out terminals
Covers to conceal fixing screws
Material: PVC.
Colour: white.
Number of gangs:2
Socket: 3-pin plug
Amps: 13A.
Power Voltage Supply:240V
Profile Type: Square Edge
13Amp Single Socket
Easy installation, supplied with captive screws and backed-out terminals
Covers to conceal fixing screws
Material: PVC.
Colour: white.
Number of gangs:2
Socket: 3-pin plug
Amps: 13A.
Power Voltage Supply:240V
Profile Type: Square Edge
45Amp W/H Switch
20Amp AC Switch
3 Gang Light Switch
