Bestsellers
-
Development Tools, Software & Embedded Computers
IoTHotspot M1
Specifications
Processing capability:
580MHz MIPS processor
128MB or 256MB DDR
Wired interface 1x 10 / 100M EthernetWireless communication:
2.4GHz 802.11 b/g/n wireless LAN
Bluetooth 4.2, BLE
External Antenna
Storage 16MB or 32MB FlashLoRa Concentrator Semtech SX1302 + SX1250
Security Built-in ATECC608A crypto deviceFrequency Band Support:
868 ~ 870 MHz (EU868, IN865, RU864)
902 ~ 928 MHz (US915, AU915, KR920, AS923-1/2/3)
Sensitivity -125dBm @125KHz/SF7
-139dBm @125KHz/SF12TX Power Up to 27dBm
Antenna
1x WiFi / BT external Antenna
1x 2.5dBi LoRa Antenna
Optional 5.8dBi LoRa AntennaLED Indicator 1x RGB LED
Button 1x Button for Hotspot Configuration
Power Supply DC 7.5 V ~ 18V
Operating Temperature 0°C to 50°CRelative Humidity 0% – 90%
Heat Dissipation Aluminum enclosure
Dimension 95mm(L) x 95mm(W) x 26mm(H)SKU: n/a -
Automation Signaling, Industrial Computers, Industrial Wireless
Iot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Automation Signaling, Industrial Computers, Industrial WirelessIot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
- Based on Raspberry Pi Compute Module, supports CM3+/CM3/CM1, especially for IoT applications.
- Rich wireless communication capability including WiFi, Bluetooth, 4G Module(Optional) & LoRa (Optional), 10/100M Ethernet, USB2.0, UART and RS485
- Diverse interface with CSI, DSI, and powerful video CODEC capability
- On board RTC, temperature sensor and low voltage detector
- Support Raspberry Pi Standard 40 Pins Connector, Mini PCI-e and 24 Pins DIP connector
SKU: n/a -
Development Boards, Evaluation Tools
ED-GW1302S LoRaWAN Gateway Module
Features
- ✓ Mini PCIe form factor with SPI interfaces
- ✓ Powered by Semtech® SX1302 baseband processor
- ✓ Ultra-low operating temperature without additional heat dissipation needed
- ✓ High sensitivity with Semtech® SX1250 TX/RX front-end; TX power up to 25 dBm @3.3V
- ✓ Supports global license-free frequency band including EU868,CN470, US915, AS923, AU915, KR920 and IN865
- ✓ Certified with CE, FCC
SKU: n/a -
Industrial Computers
CM4 Sensing (Sensing IoT World by Raspberry Pi Powered Industrial Computer)
Highlight
- Powered by Raspberry Pi CM4 with a mature software ecosystem
- Dual Storage with eMMC and SD Card for data storage
- Full Coverage Network with Gig-Ethernet,
- Dual-band WiFi and 4G LTE
- Rich Industrial Interface with RS232, CAN and up to 4 RS485
- Small, Beautiful with an excellent cooling system,
- Support DIN-rail mounting
SKU: n/a -
Industrial Computers
CM4 Nano – (The Industrial Raspberry Pi that You Expect)
ED-CM4NANO provides 2 channels USB3.0 and 1-channel USB2.0 interfaces, and the USB2.0 interface can be used to update the system image. ED-CM4NANO provides very strong expansion capabilities, supports a standard Raspberry Pi 40-pin expansion interface, and users can mechanical-easily expand high-speed equipment through an onboard USB 3.0 Type C interface.
The system supports +12V~18VDC power input, and the 40PIN socket provides 5V@2A and 3.3V@1.5A output power and supports high-power expansion modules.
The dimension of ED-CM4NANO PCB is 95*58mm, which is slightly larger than Pi4 Model B. The
connectors come out from the front and back end, a 103*62mm*5mm heat sink provides excellent cooling performance for the CPU, wireless module and PMU, and the whole system can work reliably in a high-temperature environment.Based on our real testing in the lab, ED-CM4NANO can work reliably at an ambient temperature of -25~60°C. Four M2.5 screw holes are reserved at the case bottom of the ED-CM4NANO, which is convenient for users to install the ED-CM4NANO on other equipment. ED-CM4NANO also supports DIN rail mounting.
Highlight
- Powered by Raspberry Pi CM4 with a mature software ecosystem
- Dual Storage with eMMC and SD Card for data storage
- Rich Interface with 1x Standard HDMI, 2x USB 3.0, 1x USB 2.0 and 40-PIN GPIO Expansion
- Interface Industrial Application Enhanced with 7 ~ 18V DC Input,
- External WiFi Antenna, RTC and Buzzer Compact, full meta case with excellent cooling
the system, Supports DIN-rail mounting
SKU: n/a -
Enclosures, Boxes & Cases
CM4 IO Case For Raspberry Pi Compute Module 4 IO Computer
Specifications
One-Click Switch
The one-click switch is to control the system power on and shut off by GPIO3 on a 40pin connector & the software running on Compute Module 4.
Hardware Protection
The case perfectly fits the mechanicals of the Raspberry Pi Compute Module 4 IO Board, and all interfaces are led out of the enclosure.
The metal case provides excellent shielding and protection for Compute Module 4 & IO Board.Fix Compute Module 4
The four nuts at the bottom of the case can help to fix the Compute Module 4 on the IO board & case reliably. There are four 1.5mm height black nylon washers to support Compute Module 4 on the four corners of the PCB. This feature prevents PCB deformation and circuit damage when the Compute Module 4 is screwed on the IO board without
something to support.Cooling Compute Module 4
A 12V/60mA silent fan is installed directly over the Compute Module 4, which is isolated from the case by four silicone washers, these silicone washers greatly reduce the noise magnification by the case. The fan can reduce the CPU temperature by a maximal 20°C and heat generated by the whole system is dissipated by the fan through the slots at the sides of the case.
External Antenna Raspberry Pi’s officially certified 2.4G/5.8GHz WiFi/Bluetooth Antenna is installed on the case.
Battery Offer Philips CR2032 Eco-friendly to enable RTC function.
Dimension 171.5(L) x 109.5(W) x 28.5(H) mm
Weight 450gSKU: n/a
PREPARE YOUR
OFFICE WORKPLACE
Smartphones
-
Development Tools, Software & Embedded Computers
IoTHotspot M1
Specifications
Processing capability:
580MHz MIPS processor
128MB or 256MB DDR
Wired interface 1x 10 / 100M EthernetWireless communication:
2.4GHz 802.11 b/g/n wireless LAN
Bluetooth 4.2, BLE
External Antenna
Storage 16MB or 32MB FlashLoRa Concentrator Semtech SX1302 + SX1250
Security Built-in ATECC608A crypto deviceFrequency Band Support:
868 ~ 870 MHz (EU868, IN865, RU864)
902 ~ 928 MHz (US915, AU915, KR920, AS923-1/2/3)
Sensitivity -125dBm @125KHz/SF7
-139dBm @125KHz/SF12TX Power Up to 27dBm
Antenna
1x WiFi / BT external Antenna
1x 2.5dBi LoRa Antenna
Optional 5.8dBi LoRa AntennaLED Indicator 1x RGB LED
Button 1x Button for Hotspot Configuration
Power Supply DC 7.5 V ~ 18V
Operating Temperature 0°C to 50°CRelative Humidity 0% – 90%
Heat Dissipation Aluminum enclosure
Dimension 95mm(L) x 95mm(W) x 26mm(H)SKU: n/a -
Automation Signaling, Industrial Computers, Industrial Wireless
Iot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Automation Signaling, Industrial Computers, Industrial WirelessIot Gateway (A Computer Based on Raspberry Pi Compute Module 4)
Highlight
- Based on Raspberry Pi Compute Module, supports CM3+/CM3/CM1, especially for IoT applications.
- Rich wireless communication capability including WiFi, Bluetooth, 4G Module(Optional) & LoRa (Optional), 10/100M Ethernet, USB2.0, UART and RS485
- Diverse interface with CSI, DSI, and powerful video CODEC capability
- On board RTC, temperature sensor and low voltage detector
- Support Raspberry Pi Standard 40 Pins Connector, Mini PCI-e and 24 Pins DIP connector
SKU: n/a -
Development Boards, Evaluation Tools
ED-GW1302S LoRaWAN Gateway Module
Features
- ✓ Mini PCIe form factor with SPI interfaces
- ✓ Powered by Semtech® SX1302 baseband processor
- ✓ Ultra-low operating temperature without additional heat dissipation needed
- ✓ High sensitivity with Semtech® SX1250 TX/RX front-end; TX power up to 25 dBm @3.3V
- ✓ Supports global license-free frequency band including EU868,CN470, US915, AS923, AU915, KR920 and IN865
- ✓ Certified with CE, FCC
SKU: n/a -
Industrial Computers
CM4 Sensing (Sensing IoT World by Raspberry Pi Powered Industrial Computer)
Highlight
- Powered by Raspberry Pi CM4 with a mature software ecosystem
- Dual Storage with eMMC and SD Card for data storage
- Full Coverage Network with Gig-Ethernet,
- Dual-band WiFi and 4G LTE
- Rich Industrial Interface with RS232, CAN and up to 4 RS485
- Small, Beautiful with an excellent cooling system,
- Support DIN-rail mounting
SKU: n/a -
Industrial Computers
CM4 Nano – (The Industrial Raspberry Pi that You Expect)
ED-CM4NANO provides 2 channels USB3.0 and 1-channel USB2.0 interfaces, and the USB2.0 interface can be used to update the system image. ED-CM4NANO provides very strong expansion capabilities, supports a standard Raspberry Pi 40-pin expansion interface, and users can mechanical-easily expand high-speed equipment through an onboard USB 3.0 Type C interface.
The system supports +12V~18VDC power input, and the 40PIN socket provides 5V@2A and 3.3V@1.5A output power and supports high-power expansion modules.
The dimension of ED-CM4NANO PCB is 95*58mm, which is slightly larger than Pi4 Model B. The
connectors come out from the front and back end, a 103*62mm*5mm heat sink provides excellent cooling performance for the CPU, wireless module and PMU, and the whole system can work reliably in a high-temperature environment.Based on our real testing in the lab, ED-CM4NANO can work reliably at an ambient temperature of -25~60°C. Four M2.5 screw holes are reserved at the case bottom of the ED-CM4NANO, which is convenient for users to install the ED-CM4NANO on other equipment. ED-CM4NANO also supports DIN rail mounting.
Highlight
- Powered by Raspberry Pi CM4 with a mature software ecosystem
- Dual Storage with eMMC and SD Card for data storage
- Rich Interface with 1x Standard HDMI, 2x USB 3.0, 1x USB 2.0 and 40-PIN GPIO Expansion
- Interface Industrial Application Enhanced with 7 ~ 18V DC Input,
- External WiFi Antenna, RTC and Buzzer Compact, full meta case with excellent cooling
the system, Supports DIN-rail mounting
SKU: n/a -
Enclosures, Boxes & Cases
CM4 IO Case For Raspberry Pi Compute Module 4 IO Computer
Specifications
One-Click Switch
The one-click switch is to control the system power on and shut off by GPIO3 on a 40pin connector & the software running on Compute Module 4.
Hardware Protection
The case perfectly fits the mechanicals of the Raspberry Pi Compute Module 4 IO Board, and all interfaces are led out of the enclosure.
The metal case provides excellent shielding and protection for Compute Module 4 & IO Board.Fix Compute Module 4
The four nuts at the bottom of the case can help to fix the Compute Module 4 on the IO board & case reliably. There are four 1.5mm height black nylon washers to support Compute Module 4 on the four corners of the PCB. This feature prevents PCB deformation and circuit damage when the Compute Module 4 is screwed on the IO board without
something to support.Cooling Compute Module 4
A 12V/60mA silent fan is installed directly over the Compute Module 4, which is isolated from the case by four silicone washers, these silicone washers greatly reduce the noise magnification by the case. The fan can reduce the CPU temperature by a maximal 20°C and heat generated by the whole system is dissipated by the fan through the slots at the sides of the case.
External Antenna Raspberry Pi’s officially certified 2.4G/5.8GHz WiFi/Bluetooth Antenna is installed on the case.
Battery Offer Philips CR2032 Eco-friendly to enable RTC function.
Dimension 171.5(L) x 109.5(W) x 28.5(H) mm
Weight 450gSKU: n/a
